REF : S3002AR01-BAR-AJ
DEMOLITION AND SORTING GRAB
The S3002 S-series grapple is designed for demolition, sorting and material handling with 38 to 60 ton excavators. Robust and versatile, it can be available with different shells with or without rotation to adapt to all construction sites.
Description
It is essential to ensure that the selected equipment complies with the manufacturer’s recommendations for your machine.The configurator is available to help you verify compatibility between the attachment and your excavator.Designed for sorting, demolition, recycling, and handling work, the S...
It is essential to ensure that the selected equipment complies with the manufacturer’s recommendations for your machine.
The configurator is available to help you verify compatibility between the attachment and your excavator.
Designed for sorting, demolition, recycling, and handling work, the S grapple offers a powerful, reliable, and fully modular solution for excavators from 2.5 to 90 tons.
Robust structure and high-strength components
Made of high-strength, abrasion-resistant steel from 450HB to 500HB, the grapple is designed for high wear resistance. The inverted V-shaped frame stiffens the assembly, protects the connecting rods, and improves material handling. The joints are bushed with treated pins, and the mechanical stop effectively protects the cylinder(s) from overtravel for greater durability.
Safe rotation and optimized hydraulics
Available with or without rotation, the rotating version integrates rotation with up to three motors and a large-diameter crown, protected by a shielded cover and with a flow limiter. The rotation block withstands the most demanding digging torques. A screw-in pin stop system replaces the pins for improved safety.
Maximum modularity and smart options
Several shell sets are available: BAR (standard bars), ROC (rock fill), or FAP (perforated openwork base), all designed with extra thickness. Additional options allow the clamp to be adapted to every need: Arden Jet (from the S1402) for water spraying, welded sides for holding small materials, rubber between the blade and counterblade for fragile products, and a safety valve.
Technical data and visuals are non-contractual and subject to change without prior notice.
We remain at your disposal for any technical advice by phone at +33 (0)3 24 33 64 32 or by email at commerce@arden-equipment.com.
Arden Equipment cannot be held liable in the event of improper compatibility.
The configurator is available to help you verify compatibility between the attachment and your excavator.
Designed for sorting, demolition, recycling, and handling work, the S grapple offers a powerful, reliable, and fully modular solution for excavators from 2.5 to 90 tons.
Robust structure and high-strength components
Made of high-strength, abrasion-resistant steel from 450HB to 500HB, the grapple is designed for high wear resistance. The inverted V-shaped frame stiffens the assembly, protects the connecting rods, and improves material handling. The joints are bushed with treated pins, and the mechanical stop effectively protects the cylinder(s) from overtravel for greater durability.
Safe rotation and optimized hydraulics
Available with or without rotation, the rotating version integrates rotation with up to three motors and a large-diameter crown, protected by a shielded cover and with a flow limiter. The rotation block withstands the most demanding digging torques. A screw-in pin stop system replaces the pins for improved safety.
Maximum modularity and smart options
Several shell sets are available: BAR (standard bars), ROC (rock fill), or FAP (perforated openwork base), all designed with extra thickness. Additional options allow the clamp to be adapted to every need: Arden Jet (from the S1402) for water spraying, welded sides for holding small materials, rubber between the blade and counterblade for fragile products, and a safety valve.
Technical data and visuals are non-contractual and subject to change without prior notice.
We remain at your disposal for any technical advice by phone at +33 (0)3 24 33 64 32 or by email at commerce@arden-equipment.com.
Arden Equipment cannot be held liable in the event of improper compatibility.
It is essential to ensure that the selected equipment complies with the manufacturer’s recommendations for your machine.
The configurator is available to help you verify compatibility between the attachment and your excavator.
Designed for sorting, demolition, recycling, and handling work, the S grapple offers a powerful, reliable, and fully modular solution for excavators from 2.5 to 90 tons.
Robust structure and high-strength components
Made of high-strength, abrasion-resistant steel from 450HB to 500HB, the grapple is designed for high wear resistance. The inverted V-shaped frame stiffens the assembly, protects the connecting rods, and improves material handling. The joints are bushed with treated pins, and the mechanical stop effectively protects the cylinder(s) from overtravel for greater durability.
Safe rotation and optimized hydraulics
Available with or without rotation, the rotating version integrates rotation with up to three motors and a large-diameter crown, protected by a shielded cover and with a flow limiter. The rotation block withstands the most demanding digging torques. A screw-in pin stop system replaces the pins for improved safety.
Maximum modularity and smart options
Several shell sets are available: BAR (standard bars), ROC (rock fill), or FAP (perforated openwork base), all designed with extra thickness. Additional options allow the clamp to be adapted to every need: Arden Jet (from the S1402) for water spraying, welded sides for holding small materials, rubber between the blade and counterblade for fragile products, and a safety valve.
Technical data and visuals are non-contractual and subject to change without prior notice.
We remain at your disposal for any technical advice by phone at +33 (0)3 24 33 64 32 or by email at commerce@arden-equipment.com.
Arden Equipment cannot be held liable in the event of improper compatibility.
The configurator is available to help you verify compatibility between the attachment and your excavator.
Designed for sorting, demolition, recycling, and handling work, the S grapple offers a powerful, reliable, and fully modular solution for excavators from 2.5 to 90 tons.
Robust structure and high-strength components
Made of high-strength, abrasion-resistant steel from 450HB to 500HB, the grapple is designed for high wear resistance. The inverted V-shaped frame stiffens the assembly, protects the connecting rods, and improves material handling. The joints are bushed with treated pins, and the mechanical stop effectively protects the cylinder(s) from overtravel for greater durability.
Safe rotation and optimized hydraulics
Available with or without rotation, the rotating version integrates rotation with up to three motors and a large-diameter crown, protected by a shielded cover and with a flow limiter. The rotation block withstands the most demanding digging torques. A screw-in pin stop system replaces the pins for improved safety.
Maximum modularity and smart options
Several shell sets are available: BAR (standard bars), ROC (rock fill), or FAP (perforated openwork base), all designed with extra thickness. Additional options allow the clamp to be adapted to every need: Arden Jet (from the S1402) for water spraying, welded sides for holding small materials, rubber between the blade and counterblade for fragile products, and a safety valve.
Technical data and visuals are non-contractual and subject to change without prior notice.
We remain at your disposal for any technical advice by phone at +33 (0)3 24 33 64 32 or by email at commerce@arden-equipment.com.
Arden Equipment cannot be held liable in the event of improper compatibility.
More Information
| Specification | Details |
|---|---|
| SKU | S3002AR01-BAR-AJ |
| Professions | Demolition, Earthmoving, Landscaping, Quarry, Recycling, Scrap |
| Compatible top plate(s) | PATD70B |
| A (mm) | 2400 |
| B (mm) | 1650 |
| C (mm) | 1653 |
| D (mm) | 1845 |
| L (mm) | 1450 |
| Working pressure (Mpa) | 35 |
| Flow min (l/min) | 125 |
| Maximum flow rate (l/min) | 250 |
| Rotation flow rate max (L/min) | 45 |
| Rotation pressure (MPa) | 14 |
| Rotation flow rate min (gal/min) | 35 |
| Weight (kg) | 3110 |
| Minimum carrying weight (T) | 38 |
| Maximum carrying weight (T) | 60 |
Screed compatibility
Identify here the screeds compatibles with this equipment.
See the screedsFiles
Spare Parts
Please note that these PRs are associated with the latest model currently in production.
Thank you for checking your equipment with the configurator by entering your serial number.
See the configurator| N° | Name | Reference | Actions |
|---|---|---|---|
| Spare part | |||
| Threaded adapter | RAC34503 | ||
| Plug | RAC30177 | ||
| Nut | X90922 | ||
| Steering link | X16187-200 | ||
| Cylinder | V1310A | ||
| Pin | X71328 | ||
| Pin | X71329 | ||
| Pin | X71330 | ||
| Pin | X71331 | ||
| Bushing | X80227 | ||
| Bushing | X80498 | ||
| Packing ring | J30027 | ||
| SEAL | J30127 | ||
| SEAL | J30036 | ||
| Hose | FLEX3436 | ||
| Hose | FLEX3529 | ||
| Threaded adapter | RAC30174 | ||
| Threaded adapter | RAC30245 | ||
| Threaded adapter | RAC30285 | ||
| T-Threaded adapter | RAC30315 | ||
| Threaded adapter | RAC30325 | ||
| Connection | RAC30338 | ||
| Connection | RAC30471 | ||
| Threaded adapter | RAC32236 | ||
| Threaded adapter | RAC32237 | ||
| Socket head capscrew | CHC10-040C12 | ||
| Socket head capscrew | CHC10-130C12 | ||
| Nut | H10C10 | ||
| Self-locking nut | HFR39 | ||
| Castle nut | HK56C10 | ||
| Lock washer | RZ10 | ||
| Flat washer | RP42-095-06 | ||
| Flat washer | RP60-120-15 | ||
| Split pin | GF06-080 | ||
| Grease nipple | GR1/8 | ||
| Grease nipple | GM8 | ||
| Seal Kit | V1174-PJ | ||
| Nut | H24C10 | ||
| Hex socket Countersunk head sc | FHC24-090C10 | ||
| Lock washer | RW24 | ||
| BLADE SET WITH NUTS AND BOLTS | CL-16193 |
Get a Quote for
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.